Does the interior of a constant temperature and humidity test chamber need to be cleaned?

Regardless of the type of machinery, regular cleaning and maintenance are essential, as they help extend the lifespan of the equipment. Therefore, cleaning and maintenance are indispensable.

So, does the interior of a constant temperature and humidity test chamber need to be cleaned? It’s generally understood that cleaning is necessary, but many people are unsure about the correct cleaning methods. Incorrect cleaning methods can seriously damage the equipment. Below, let Linpin Instruments introduce which areas of the chamber need to be cleaned:

1. After each test, the internal impurities of the constant temperature and humidity test chamber need to be cleaned.
2. The water circulation system should be cleaned, including cleaning the water filter, replacing the filter mesh, checking the operation of the water pump (including whether the water flow switch operates correctly), adjusting water circulation flow, and conducting a test run.
3. Inspect all electrical lines and components, and remove dust.
4. Clean or replace the fresh air filter.
5. Clean the refrigeration system: replace the refrigerant oil and clean the oil filter mesh.
6. Check easily worn parts of the refrigeration system: inspect the seal condition of the compressor and its connecting components, remove dust, and replace all filters.
7. Clean and dust the exhaust and intake ports.
8. If the compressor has been used for a long time, there may be oil deposits, carbon buildup, sediment, and rust. It is necessary to periodically use a cleaning agent to clean the compressor head, paint bucket, radiator, and the inside of the oil pipes.

The purpose of the constant temperature and humidity test chamber is to simulate environmental tests of the physical and other related characteristics of products under low and high-temperature conditions, according to national standards or user-defined requirements. Its feature is to provide a special environment for temperature and humidity, as the name suggests, it can offer a stable temperature and humidity environment to test product performance parameters and other indicators.