MIL-STD Standard Rain Test Chamber

Product Usage ：MIL-STD Standard Rain Test Chamber（Military Standard Rain Test Chamber）used for military equipment or electronic products in a variety of intensity rain environment simulation of dynamic operation, military equipment rain test method and the main parameters, in a test box can be realized in the wind source of rain test, drip test. Determine the military equipment or electronic products in the rain conditions, the ability of its shell seals to prevent rainwater infiltration and by the rain or after the work of the performance, to assess the waterproof quality of the product.

Apply to：

Customizable ：Specific product specifications and parameters can be customized according to the customer's actual situation or customization. You can contact us at any time to obtain quotations and solutions.

Chat Online E-mail Sends

Parameter Details

Product Parameter

Model		Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-1320-PL		1600mm×2500mm×3300	约2500mm×5100mm×3563

temperature range	Water temperature +10°C
quantity of rainfall	10—15cm/h
raindrop diameter	0.5—4.5mm
Test wind speed	Horizontal wind speed 10-18m/s adjustable
raindrop angle	The raindrops have a horizontal direction to 45 ° angle change, and uniformly flutter on the side of the test piece
Intensive rainfall	This procedure may be considered when testing large specimens where rainfall and rain blowing devices cannot be used.
quantity of rainfall	2800+30L/m2/h
	Rain drops cannot be aggregated into a stream, and the dispenser distributes the drip holes in a matrix at 20-25.4mm intervals.
Rainfall distance	The drip height should ensure that the final velocity of the water drop is 9m/s
Turntable size/carrying capacity	Diameter: φ1000mm, Load: ≥50kg
Speed range	1~5r/min continuously adjustable
Workpiece size limitation	Maximum allowable size of test piece: 1000mm×1000mm×1000mm
Outer case material	High-quality library boards
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam
drip tray	Imported high-grade stainless steel SUS304 + aluminum plywood + aluminum profile
Controller	Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
Heating systems	Nichrome wire heaters
temperature sensor	High Accuracy Pt100 Platinum Resistance Temperature Sensors
Wind Speed Sensor	Differential pressure air velocity sensor, 4-20mA output
security protection		Fan, motor, pump overcurrent overload protection, limit, undervoltage, short circuit, phase loss, over temperature, leakage protection
Supply Voltage		AC380V±10% 50Hz
Supply Voltage		AC380V±10% 50Hz
Power		24.5kW

product

Feature

The main features of the MIL-STD Standard Rain Test Chamber：
1. Workroom 1000L is available and other sizes can be tailored.
2. IPX1, IPX2 made functions on one test chamber, more convenient and cost-effective.
3. Drip Nozzle needles are screw-in type, tightly installed.
4. Touch-screen programmable controller
5. Controller shows models of IPX1 to IPX6, easy to operate.
6. Data logging and download available.
7. Rotational speed of rotary table is adjustable.
8. Height of Rotary Table is adjustable.
9. Cable access port φ50mm,100mm and 160mm are available.
10. Removable motor protective casings for maintenance access
11. Door opening safely
12. Fixable and movable casters with great convenience.
14. Multiple protections on phase sequence, power leakage, etc.
15. Easily accessible maintenance elements