FRP Material Composite Salt Spray Chamber

Product Usage ：The FRP Composite Salt Spray Chamber （Fiberglass composite salt spray test chamber）is used to assess the salt spray corrosion resistance of materials and their protective coatings, as well as to compare the process quality of similar protective coatings. It can also be used to evaluate the salt spray corrosion resistance of certain products. It is suitable for corrosion testing of components, electronic components, protective coatings of metal materials, and industrial products under composite salt spray conditions.

Apply to：

Customizable ：Specific product specifications and parameters can be customized according to the customer's actual situation or customization. You can contact us at any time to obtain quotations and solutions.

Chat Online E-mail Sends

Parameter Details

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1600×600
LRHS-1080-RFHY	900×2000×600

temperature range		RT+5℃～80℃
Humidity range		30%～98% RH
Saturated drum temperature		RT+10℃～70℃
Temperature uniformity		≤2℃
Temperature fluctuation		±0.5℃
Salt spray deposition		1～2ml/80 cm².h(16-hour average)
Compressed air pressure		2.00±0.01（kg/cm²）
Spraying method		Continuous/periodic selectable
Specimen holder angle		20±5°
Test Methods		NSS test AASS test CASS test
Case Material		Fiberglass reinforced plastic (FRP)
Lid Material		Fiberglass reinforced plastic (FRP)
Air-saturated drums		High quality premium stainless steel SUS304
Pressurized Air Hose Material		High quality rubber hose
Other pipelines		Thickened Fluorosilicone Rubber Tubing
Temperature Controller		High-quality “UEC” brand temperature and humidity meter
Dehumidification and cooling		Single or double cascade refrigeration
Compressor		Taikang, France
temperature sensor		PT100 platinum resistance temperature measurement body
heater		Titanium Heating Tube
interrupter		Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration		V-shaped sample holder, round rod, nozzle, funnel, measuring cylinder, mist exhaust pipe
security protection		Phase loss/reverse phase for the entire machine, equipment timing, rapid mist exhaust indicator, test completion Over-temperature, low water level protection, leakage current, short circuit, compressor overpressure overload
Supply Voltage		AC380V±10% 50Hz
Power		8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
Temperature:	5℃～＋35℃（(Average temperature over 24 hours ≤ 28°C)
Relative Humidity:	≤85%RH
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the user’s specific requirements, such as non-standard test chamber 3、This technical information, if there is any change without prior notice

product

Feature

The main features of the FRP Material Composite Salt Spray Chamber：
1. Imported reinforced hard PP plates with smooth and flat surface
2. Imported transparent impact-resistant plates as observe window
3. All pipe is anti-corrosion can be used 15years .
4. Adopt water seal method to prevent leakage of salt spray.
5. With air pressure cylinder for convenient operation.
6. Independent heating system , fast speed , temperature and humidity are evenly distributed
7. Equipped with automatic demisting device
8. Fault alarm and resolution remind function
9. Power failure protection function
10. Self-diagnosis function
11. Calendar timing function
12. Tri-color Indicator and EMO (Emergency-off Switch) available