Hydrogen Fuel Cell Test Chamber

Product Usage ：Hydrogen fuel cell test chamber is a special environment simulation test chamber developed for hydrogen-related environment simulation test system, which consists of main environment simulation test chamber, hydrogen pre-cooling system and air pre-cooling system.

Apply to：High and low temperature test, environmental simulation test

Customizable ：Specific product specifications and parameters can be customized according to the customer's actual situation or customization. You can contact us at any time to obtain quotations and solutions.

Chat Online E-mail Sends

Parameter Details

Device model	LRHS-22.5M-QDC
Studio size	3000mm×3000mm×2500mm (width×depth×height)
Dimensions	3200mm×3920mm×2780mm (width×depth×height), excluding motor height
Unit size	About 2600mm×2500mm×2080mm×1 set (width×depth×height)
Power cabinet size	About 1000mm×800mm×2080mm×2 sets (width×depth×height)
Hydrogen system dimensions	Approximately 4320mm×2300mm×2080mm (width×depth×height), excluding motor height
Air system dimensions	Approximately 5020mm×2500mm×2080mm (width×depth×height), excluding motor height
Power cabinet size	About 800mm×600mm×2080mm×5 sets (width×depth×height)

Performance	temperature range	-50℃～+100℃【Meet static storage requirements】 -40℃~85℃ [Meet heat load requirements, up to 150kW heat dissipation]
	Humidity range	10%~95%RH (within the range of 10℃~85℃) [static no heat load] At 65℃, the response time for humidity from 10% to 95% does not exceed 100min [static no heat load] Temperature and humidity 60℃/90%RH [heat load 150kW]
	Temperature control accuracy	≤±1℃ [when the engine is not running], ≤±3℃ [when the engine is running, maximum heat dissipation is 150kW]
	temperature fluctuation	≤±0.5℃ [no load], ≤±3℃ [with load 150KW]
	temperature uniformity	≤2.0℃【When the engine is in the cabin without heat dissipation】
	Humidity control accuracy	Within ±5%RH [no load]
	Humidity fluctuation	≤±5%RH【no load】
	Heating rate	-40℃～+85℃, the average speed of the whole process is 1℃/min [540kg electric stack is placed inside, and the heat dissipation is 150KW]
	cooling rate	+85℃～-40℃, the average speed of the whole process is 1℃/min [540kg electric stack is placed inside, and the heat dissipation is 150KW]
	Customer testing product	Test product: metal fuel cell stack engine + total weight: 540kg + stack power: 150kw
Material	Outer box material	High-quality cold-rolled steel plate (t=1.0mm), surface electrostatic spray treatment
	Inner box material	Stainless steel plate (SUS304-CP 2B grinding)
	Base material	Welding of anti-slip stainless steel plate (SUS304) t=3.0mm. Bottom plate load-bearing requirement: greater than 2T/mP2
	Insulation material	150mm rigid polyurethane foam insulation layer
	flashlight	Explosion-proof LED lights are moisture-proof, explosion-proof, transparent, heat-insulating, and not prone to steam frosting, etc.
Basic Specification	controller	Imported "Youyikong" brand temperature and humidity meter
	Cooling System	German "BITZER" semi-hermetic air-cooled/water-cooled compressor refrigeration method
	Temperature Sensor	High-precision Pt100 platinum resistance temperature sensor
	Humidity Sensor	High-precision Finnish Vaisala "vaisala" capacitive humidity sensor
	Pressure relief hole	Equipped with an electric pressure balance device to maintain a slight positive pressure ranging from 0 to 50Pa in the environmental chamber under any circumstances.
	Blower	Single suction multi-blade centrifugal explosion-proof fan, adjustable frequency
	safe calling system	There is a call system inside the box, which is convenient for calling in case of emergencies and ensures the safety of the staff inside in emergencies.
Optional accessories		Pump-type explosion-proof hydrogen/oxygen concentration alarm system, smoke concentration alarm, access control system, explosion-proof sink pressure protection device, visual monitoring system, etc.
safety protection		Compressor low pressure/overload/high pressure alarm, hydrogen/oxygen/smoke concentration alarm, fan overload, system abnormality alarm, emergency stop switch, water shortage, short circuit, phase loss, over-temperature and other protections
voltage		AC380V±10% 50Hz
total power		Maximum load capacity is about 270KW, maximum current: 480A Hydrogen system power is about 138KW, maximum current: 240A Air system power is about 165KW, maximum current: 290A Total air switch capacity 1500A

product

Feature

1. Modern attractive styling
2. Large double doors/Viewing windows
3. Custom Sizes Available. 4. Touch Screen Programmer
5. User-Friendly Controls. 6. Wide temperature and humidity ranges
7. Capable of handling extreme temperature and humidity
8. Tri-color Indicator and EMO (Emergency-off Switch) available.
9. High performance even under load
10. Modular,Robust Reliable construction
11. Painted galvanized steel exterior for long life
12. Heavy-duty flooring to support vehicles. 13. Mechanical cooling
14. Comprehensive safety features. 15. Refrigeration gauges
16. Refrigeration sound deadening package
17. Low or zero ozone depletion refrigerants
18. All circuits fused or circuit breaker protected.
19. All wiring numbered or color coded
20. Compressor overload protection
21. Prefabricated for On-Site Installation