Precautions for Sample Placement in a High and Low Temperature Shock Test Chamber Author：LINPIN Update Time：2025-03-27 Source：LINPIN The High and Low Temperature Shock Test Chamber is a testing device used to simulate the effects of cold and hot environments on samples. When using a cold and hot shock test chamber for testing, the following precautions should be taken regarding the placement of samples: The size of the sample should be compatible with the internal dimensions of the test chamber to prevent movement or damage during the cold and hot shock process. Flammable, explosive, or corrosive substances should not be placed inside or around the chamber, as they may cause damage to the equipment. The sample should be placed in the central position inside the test chamber to ensure that the cold and hot shock is evenly distributed over the surface of the sample. The sample should be placed on a flat surface inside the test chamber to prevent deformation or damage during the cold and hot shock process. The surface of the sample should be dry to prevent inaccurate test results. The sample should avoid contact with other items inside the test chamber to prevent collisions or damage during the cold and hot shock process. When conducting the cold and hot shock test, safety should be observed, and contact with other items inside the test chamber should be avoided. These are some of the precautions to be taken when placing samples in a cold and hot shock test chamber.
