4 Common Misuse Habits of High Low Temperature Chamber

Author:LINPIN Update Time:2025-04-22 Source:LINPIN

Have you noticed that your High Low Temperature Chamber wears out quickly despite not being used for long? In fact, many times, it's due to small daily habits that accelerate the "aging" of the chamber. Let’s take a look at these common mistakes!

  1. Frequent Door Opening
    Constantly opening and closing the chamber door can cause significant wear. Each time the door is opened, cold air escapes, affecting cooling efficiency and increasing energy consumption. Therefore, minimize door openings and keep the door tightly closed to ensure the chamber operates more efficiently.

  2. Long-Term Inactivity
    Sometimes, the chamber may be left unused for extended periods. However, prolonged inactivity can lead to internal component moisture buildup, affecting performance. It’s recommended to run the chamber for at least an hour periodically to extend its lifespan.

  3. Forcibly Cutting Power
    During normal operation, the thermostat automatically cuts off power when the refrigeration system’s high and low pressures are balanced, reducing motor load. If you forcibly disconnect the power and restart it immediately, it may create a high-pressure imbalance, increasing motor load and risking burnout. Always wait at least 3 minutes after power loss before restarting to allow pressure stabilization.

  4. Improper Cleaning Agents
    When cleaning the chamber, avoid using detergents like laundry powder, scouring powder, talcum powder, alkaline cleaners, boiling water, or brushes, as they can damage the interior lining or piping. Instead, use a soft cloth dampened with water or mild dish soap, gently wipe the surfaces, and then rinse with clean water. Be careful not to touch electrical components to ensure safety. After cleaning, reconnect the power and verify that the temperature controller is set correctly.

In summary, while high/low temperature test chambers are durable, proper usage and maintenance are essential to prolong their service life. Hopefully, these tips will help you keep your chamber running smoothly for years to come!

Submit your requirements